全国服务热线:13940183063

「宁波快速门」车间货物通道快速门

日期:2019-08-14 20:00 人气:

「宁波快速门」车间货物通道快速门


Fast Gate for Goods Passage in Ningbo Express Gate Workshop



很多的工厂都具有货物检测通道,可与传动带搭配使用,我们的快速门也能够在这种流水线作业中起到不小的作用。


Many factories have cargo inspection channels, which can be used with transmission belts. Our fast doors can also play an important role in this pipeline operation.


安装于传动带或者货物通道上的快速门,通常尺寸较小,轨道及包厢部分属于特殊定制,内置式电机,不占用空间。


Fast doors mounted on drive belts or cargo passages are usually small in size, and the rails and boxes are specially customized, with built-in motors that do not occupy space.


车间货物通道快速卷帘门
 


可采用红外、雷达感应开启,轨道下端安装安全光幕,避免砸伤员工或货物。


It can be opened by infrared and radar induction, and the safety light curtain can be installed at the lower end of the track to avoid injuring employees or goods.


「宁波快速门」车间货物通道快速门


Fast Gate for Goods Passage in Ningbo Express Gate Workshop


常见的食品工厂的生产车间,大多都是无尘车间,对于外部的空气,是尽量不然进入车间,否则会污染车间的食品或者精密仪器,这个时候,就两种方案选择;


Common food factory production workshop, mostly dust-free workshop, for the external air, is to try not to enter the workshop, otherwise it will pollute the food or precision instruments in the workshop, at this time, the choice of two options;


第一种就是使用风淋室,在人员进出和有货物进入的时候,把灰尘在风淋室里面处理掉,使其达到洁净的效果。


The first is to use the air shower room. When people enter or leave and goods enter, dust will be removed from the air shower room to achieve a clean effect.


第二种是用在出货的传送带上,现在很多生产车间都实现半自动化,货物的流动依靠传送带传送到指定地点


The second is to use the conveyor belt to deliver goods. Now many production workshops are semi-automated. The flow of goods depends on the conveyor belt to deliver to the designated location.


但是,有些货品的生产车间是一种环境,需要到另外环境的车间加工,这时候两个车间的环境的空气是不能混合的


However, the production workshop of some goods is an environment which needs to be processed in another environment. At this time, the ambient air of the two workshops can not be mixed.


内置电机快速卷帘门


但是传送带和货物传送的位置,是需要占一定的空间,这样,两个车间的环境就会出现一个交汇的洞口,这时候,小型的快速门正好可以发挥作用


But the location of conveyor belt and cargo transport needs to occupy a certain space, so that the environment of the two workshops will have an intersection of the hole, at this time, the small express door can just play a role.


我们常见的快速门,大多都是2米以上甚至更大,而传送带上的洞口,基本都是1米的宽度,高度可能也在1米内甚至更小


Most of our common fast doors are more than 2 meters or larger, and the holes on the conveyor belt are basically 1 meter wide, and the height may be less than 1 meter.


这时候,小型的快速门,作用在上面是非常合适,用过快速门的企业都知道,快速门常用于无尘车间,有隔离、防尘、保温的作用,同时具备快速开闭,


At this time, small fast doors, the role of the above is very suitable, the use of fast doors enterprises know that fast doors are often used in dust-free workshops, isolation, dust, insulation, and also has a rapid opening and closing.


所以,小型的快速门,在这种传送带的洞口,是非常合适的,可以把原本的安全光电用来感应货物,然后发送信号来控制快速门打开。


Therefore, the small fast door, in this conveyor belt hole, is very suitable, can use the original safety photoelectricity to sense goods, and then send a signal to control the fast door open.


这样就能实现快速门的自动开启关闭功能。这样就大大的节约的人工成本,同时又达到的隔离作用。


In this way, the automatic opening and closing function of the fast door can be realized. In this way, the labor cost is greatly saved, and the isolation effect is achieved at the same time.